冲压外圈滚针离合器

DRAWN CUP NEEDLE CLUTCH AND BEARING ASSEMBLY

HFL

HFLZ英制

HFL,HFLZ

Shaft Diameter	Bearing Designation	Boundary Dimensions			Rotation torque	Limiting Speed		Basic Load Ratings
Shaft Diameter		F_W	D	C	Rotation torque	n	nl**	C	Co
mm		mm			Nm	rpm		N
4	HFL0408	4	8	8	0.34	34000	14000	1270	1740
6	HFL0615	6	10	15	1.76	23000	13000	1650	2030
8	HFL0822	8	12	2	3.15	17000	12000	4050	4150
10	HFL1022	10	14	22	5.3	14000	11000	4300	4650
12	HFL1226	12	18	26	12.2	11000	8000	6300	6500
14	HFL1426	14	20	26	17.3	9500	8000	6300	6500
16	HFL1626	16	22	26	20.5	8500	7500	7300	8400
18	HFL1826	18	24	26	24.1	7500	7500	8200	10300
20	HFL2026	20	26	26	28.5	7000	6500	8300	10400
25	HFL2530	25	32	30	66	5500	5500	10900	14100
30	HFL3030	30	37	30	90	4500	4500	12600	17600
35	HFL3530	35	42	30	121	3900	3900	13000	19300
3/8	HFLZ061014	9.525	15.875	22.22	50.4	14000	12000	1315	1240
1/2	HFLZ081214	12.7	19.050	22.22	85.9	11000	9000	1720	1550
5/8	HFLZ101416	15.875	22.225	25.4	175.2	8500	5000	1720	1890

*The limit speed is effective to both grease and oil lubricants. **The limit speed of the outer ring when rotating.

BALL BEARING SINGLE DIRECTION CLUTCH
DX

Shaft Diameter	Bearing Designation	Boundary Dimensions			Rating torque	Limiting Speed	Basic Load Ratings		Ball count
Shaft Diameter		F_W	D	C	Rating torque	Limiting Speed	C	Co
mm		mm			Nm	rpm	N
17	DX203	17	42	12	14.5	17000	9560	4750	24
20	DX204	20	47	14	23	15000	12700	6550	28
25	DX205	25	52	15	31.2	12000	14000	7800	32
30	DX206	30	62	16	42.8	10000	19500	11200	36
35	DX207	35	72	17	53	9000	22500	15300	40